Marine 4/3 Channel Amplifier

Xm604m
Model number: XM604M
Rated out of 5 Stars
Model features: 600W max power, 60W x 4 RMS into 4 ohms, 70W x 4 RMS into 2 ohms, 160W x 1 RMS into 4 ohms (rear), selectable 80Hz HPF/LPF

ADDITIONAL IMAGES:

$ 259 .99

Redeem 25,999 Sony Points(?)

Find Sony Style Stores Near:

ZIP Code:

SUBMIT

Building a competent marine entertainment system has never been easier, especially with the XM-604M Xplōd™ 4/3 channel marine amplifier at the core. Designed to resist the rigors of salt water and sunshine, this amp features multiple channel configurations and single-side electrical connections to suit almost any application.

RMS Power at 2 Ohm

70W x 4 RMS (20Hz-20kHz, < 1% THD+N, 2 Ohms, 14.4V)

High Level Input with Sensing Power On

Direct connection (High-level Input) can be made with the speaker output of your car receiver if the unit is not equipped with RCA line output. High Level Sensing power on feature allows the unit to be activated without the need for remote turn on connections.

RMS Power at 4 Ohm

60W x 4 RMS (20Hz-20kHz, < 1% THD+N, 4 Ohms, 14.4V)1

MAX Power at 2 OHM

This unit has a maximum output power of 150W per channel at 2 Ohm.

Selectable Crossover

Built in selectable 12 dB/Oct 80 Hz HPF for front and 80 Hz LPF for rear

MAX Power at 4 Ohm

This unit has a maximum output power of 110W per channel at 4 Ohm.

Marine Features

Conformal Circuit Board Coating, UV-resistant paint, Anti-rust paint on front panel and bottom plate, Gold-plated Screws, Terminals, and Connections.

Product Specifications

Audio Features

  • Level Control : High Level Input: 6.0 - 12V

Speaker

  • Impedance : 2-8 Ohms in Stereo Mode
  • Speaker Terminal Type : Output

Amplifier Section

  • Max power output : 600W max power
  • Power Ad Hoc : 60W per channel at 4 Ohms from 20Hz-20kHz with < 1% THD
  • Speaker Impedance : 2-8 Ohm stereo 4-8 Ohms mono
  • Speaker Impedance : 2-8 Ohm stereo 4-8 Ohms mono

Inputs and Outputs

  • Audio In : RCA Pin Jacks, High Level Input Connector
  • Audio Out : Speaker Terminals
  • Input(s) : RCA Pin Jacks and High Level Speaker Input Connector
  • Line Level Input(s) : RCA pin jacks
  • Output(s) : Speaker Terminals
  • RCA Audio Input(s) : Pin Jacks: 0.3 - 6V

Weights and Measurements

  • Dimensions (Approx) Depth : 10 1/2"
  • Dimensions (Approx) Height : 2 1/4"
  • Dimensions (Approx) Width : 15 7/8"
  • Dimensions (Approx.) : 15 7/8 x 2 1/4 x 10 1/2" (401 x 55 x 264mm)
  • Dimensions (Approx.) : 15 7/8 x 2 1/4 x 10 1/2" (401 x 55 x 264mm)
  • Weight (Approx.) : 7lbs 1oz (3.2Kg)

Audio

  • Band : Low Pass Filter: 80 HZ, -12dB/oct High Pass Filter: 80 HZ, -12dB/oct
  • Band : Low Pass Filter: 80 HZ, -12dB/oct High Pass Filter: 80 HZ, -12dB/oct
  • Circuit System : OTL Output Transformerless Circuit Pulse Power Supply
  • Circuit System : OTL Output Transformerless Circuit Pulse Power Supply
  • Frequency Response : 5 Hz - 50 Khz (+0/-3 db)
  • Harmonic Distortion : 0.005% (1 kHz)
  • Impedance : 2-8 Ohms Stereo, 4-8 Ohms Mono
  • Impedance : 2-8 Ohms Stereo, 4-8 Ohms Mono
  • Input Level : 0.3 - 6.0V (RCA input) 2.8 - 12.0V (High Level Input)
  • Input Level : 0.3 - 6.0V (RCA input) 2.8 - 12.0V (High Level Input)
  • Noise Level : 97 dBA
  • Power Supply : OTL Output Transformerless Circuit Pulse Power Supply
  • Power Supply : OTL Output Transformerless Circuit Pulse Power Supply

Power

  • Current Drain : At rated output: 33 A (4 Ohm, 60W x 4) Remote Input 1 mA
  • Input Voltage : 10.5-16V Power Supply Voltage
  • Internal Power Supply : OTL (Output Transformerless Circuit) Pulse Power Supply
  • Output Power : Maximum Output: 110 W x 4 (at 4 Ohms) Three Speakers: 150 W x 2 (at 2 Ohms) + 300 W x 1 (BTL at 4 Ohms)
  • Output Power : Maximum Output: 110 W x 4 (at 4 Ohms) Three Speakers: 150 W x 2 (at 2 Ohms) + 300 W x 1 (BTL at 4 Ohms)
  • Power Requirements : 12 V DC marine battery (negative ground)
  • Rated Output : 60 W x 4 (20 Hz - 20 kHz, 1% THD, at 4 Ohms, 14.4V), 70 W x 4 (20 Hz - 20 kHz, 1% THD, at 2 Ohms, 14.4V)
  • Rated Output : 60 W x 4 (20 Hz - 20 kHz, 1% THD, at 4 Ohms, 14.4V), 70 W x 4 (20 Hz - 20 kHz, 1% THD, at 2 Ohms, 14.4V)

In the Box

  • Protection Cap (1)
  • Mounting Screws (4)
  • High Level input cord (1)

Product Profile

Support

Product Warranty

No reviews yet. Be the first!

Write a review

VIEW FOOTNOTES

  1. CEA-2006 Compliant — Standardized “Voluntary” Testing & Measurement Methods for Mobile Audio Amplifiers. This standard advocates a uniform method for determining an amplifier’s RMS power and signal-to-noise ratio. Using 14.4 volts, RMS watts are measured into a 4-ohm impedance load at 1 percent Total Harmonic Distortion (THD) plus noise, at a frequency range (for general purpose amplifiers) of 20 Hz to 20,000 Hz.

© 2009 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony, Memory Stick, nav-u, Quick-BrowZer, Walkman, Xplod, ZAPPIN, and the Sony, nav-u and Xplod logos are trademarks of Sony. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. Bluetooth is a trademark of Bluetooth SIG, Inc. NAVTEQ Maps & Traffic is a trademark of NAVTEQ. All other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice. Non-metric weights and measures are approximate.